Highlander 1
Back
KOC Long Range reticle is designed and engineered to find instantly the distance of your target, to calculate and
adjust bullet trajectory accordingly, and compensate wind speed and angle shooting.
NO Turrets to turn or Estimate distance JUST AIM AND SHOOT
The calculations for this Reticle are based on the speed of the bullet. Caliber and bullet weight = Speed
HOW TO ZERO IN YOUR RIFLESCOPE WITH KOC LONG RANGE RETICLE
1) Mount your riflescope with proper rings and bases ( Make sure all hardware are tight and secured )
Riflescope must be positioned close to the rifle barrel.
2) Bore Sight your riflescope
3) Place your target at 25 yards
4) Set your scope at the lowest magnification power at 3.5X
5) Fire your rifle from a bench rest
6) Fire 3 shots on the target. If your 3 shots are not in the center of your target adjust your scope until your 3 shots
are placed in the center of the target. ( allow your rifle barrel to cool off between shots)
7) After you have sighted your riflescope successfully at 25 yards, place your target at 200yards to do the final
adjustments.
For a target of 200yds or less, your point of aim is the center of your reticle.
For the scope to read accurately the distance and adjust bullet trajectory accordingly for targets over 200yds, your
scope must be set at 8x magnification power
Set your scope to 8x magnification power to zero in your scope at 200yds
The KOC 1 and KOC II Long Range reticles are calibrated for the following calibers 2506 (100g), 270W (130g), 280Rem (140g), 270WSM (150g), 270 Wby mag (150g), 300WM (180g), 300 WSM (180g), 300 Rem Ultra (200g), 300 Wby mag (180g),338 Rem. Ultra (225g), 338 Lapua mag (250g), 7mm Mag (150g). Velocity in feet per second must be within ( 2950fps to 3200fps )
HOW TO FIND DISTANCE OF YOUR TARGET
Point riflescope and match range finding
circle with your target . Each range finding
circle is designed to cover a target of 18" (inches).
EG: With a deer size target the range find point which will fit inside the circle
is the body of the deer. See Diagram on the right.
For Larger size animal
( Moose Elk and etc. ) the range find part of the animal is the neck
Once the range is determined the point of impact is automatic.
adjust bullet trajectory accordingly, and compensate wind speed and angle shooting.
NO Turrets to turn or Estimate distance JUST AIM AND SHOOT
The calculations for this Reticle are based on the speed of the bullet. Caliber and bullet weight = Speed
HOW TO ZERO IN YOUR RIFLESCOPE WITH KOC LONG RANGE RETICLE
1) Mount your riflescope with proper rings and bases ( Make sure all hardware are tight and secured )
Riflescope must be positioned close to the rifle barrel.
2) Bore Sight your riflescope
3) Place your target at 25 yards
4) Set your scope at the lowest magnification power at 3.5X
5) Fire your rifle from a bench rest
6) Fire 3 shots on the target. If your 3 shots are not in the center of your target adjust your scope until your 3 shots
are placed in the center of the target. ( allow your rifle barrel to cool off between shots)
7) After you have sighted your riflescope successfully at 25 yards, place your target at 200yards to do the final
adjustments.
For a target of 200yds or less, your point of aim is the center of your reticle.
For the scope to read accurately the distance and adjust bullet trajectory accordingly for targets over 200yds, your
scope must be set at 8x magnification power
Set your scope to 8x magnification power to zero in your scope at 200yds
The KOC 1 and KOC II Long Range reticles are calibrated for the following calibers 2506 (100g), 270W (130g), 280Rem (140g), 270WSM (150g), 270 Wby mag (150g), 300WM (180g), 300 WSM (180g), 300 Rem Ultra (200g), 300 Wby mag (180g),338 Rem. Ultra (225g), 338 Lapua mag (250g), 7mm Mag (150g). Velocity in feet per second must be within ( 2950fps to 3200fps )
HOW TO FIND DISTANCE OF YOUR TARGET Point riflescope and match range finding
circle with your target . Each range finding
circle is designed to cover a target of 18" (inches).
EG: With a deer size target the range find point which will fit inside the circle
is the body of the deer. See Diagram on the right.
For Larger size animal
( Moose Elk and etc. ) the range find part of the animal is the neck
Once the range is determined the point of impact is automatic.
WARNING: Beware of counterfeit and imitation. Some scope manufacturers are trying to imitate our riflescopes by placing lines and circles on their reticles and naming them long range riflescopes. This is misleading to the consumers. Our blue prints below show the engineering and the tremendous amount of calculations that took place prior to the production of our KOC reticle. |
 |
 |
| This is how you aim your target from 0 yards up to 200yards |
For Security reasons all the calculations shown in this blueprint have been modified |
 |
 |
| The target for a deer is a body shot This is approx. 18" This is how to find the range of a deer at 300 yds. |
This is how you would aim for a deer after finding the range at 300 yds. |
 |
 |
| The target for a deer is a body shot This is approx. 18" This is how to find the range of a deer at 400 yds |
This is how you would aim for a deer after finding the range is 400 yds. |
 |
 |
| This is how you would find the distance for a deer when the range is 500 yds and this how you would aim. |
This is how you would find the distance for a deer when the range is 600 yds, and this how you would aim |
 |
|
| This is how you would find the distance for a deer when the range is 700 yds, and this how you would aim |
|
Back